43
8.6 Men
u “Output Settings“
The parameters for the IP output transport streams can be configured in this menu.
The parameters for all IP output channels are set
The parameters for each IP output channel are set
in this menu. The following ports are assigned
in this menu. Press the button
“Apply“ and the data will
automatically to the specified IP address, the port
be sent to the device.
and the increment „Step“. Press the button
“Apply“ and the data will be sent to the device.
I
n the “ASI Settings“, an IP transport stream is assigned to the two ASI outputs.
The settings are accepted by pressing the "Apply" button.
Click here to set the output
parameters for individual IP
channels.
Click here to set the output
parameters for all IP channels.
