62
User Guide
The PolyVision driver
“
Replay Strokes
”: When you check this box, pen strokes are remembered
when you switch from pen mode to cursor mode, and back to pen mode.
Pen strokes accumulate until you erase all.
“
Desktop alert window size
”: If you have enabled the desktop alert
window in the “General” tab, you can choose between a large or small alert
windows size.
Hardware options
To configure hardware options:
Ŗ
Click the “Hardware” tab. You see these options:
“
Installed Hardware
”: The communicating PolyVision products and their
status appear in the list.
“
Change Remote ID
”: (Walk-and-Talk models only) Click this button to
assign one of the remote control slide switch settings to a whiteboard. The
slide switch has three positions corresponding to “A,” “B,” or “C.” If you
choose “A,” “B,” or “C,” the selected board responds to the remote control
when the slide switch on the remote is in the corresponding position. If you
choose “A/B/C” the board responds regardless of the position of the slide
switch on the remote control. (Refer to "Operating Walk-and-Talk products"
on page 33.)
9A67)DQQMHO2CIG(TKFC[,WPG#/
