40
The Impulse Web Server
Impulse™ L
TX Multimedia Whiteboar
d System
2
Enter the network printer’s IP address in the “Network Printer Address”
field.
3
Click “Save changes” to save the change.
RoomWizard address:
If you enter the host name or IP address of a
RoomWizard, then whenever you capture password protected images, the
Impulse system names the protected files with the meeting name from the
RoomWizard, rather than with the date and time as usual.
Projector Style:
Choose the projector configuration used for this board.
The Impulse system can be installed with a projector permanently wired to
the board. Alternatively, you can connect a portable projector using cables
provided in the bins beneath the board. Click “None” to disable projection
for this board. If the projector is permanently mounted, the Impulse system
does not prompt for projector alignment each time you enter Merged
Projection Mode. If the projector is portable, the Impulse system prompts
each time you enter Merged Projection Mode, in case the projector has
been moved.
Click “Save changes” to implement any changes.
LTX_UG_04.fm Page 40 Thursday, April 7, 2005 11:38 AM
