Automatic boiler for wood pellets
14
3.3
BURNER HEATING CHAMBER INCL. FEEDER F1 WITH INDEPENDENT DRIVE
The heating chamber is depicted in picture Nr. 1 and is comprises of these parts:
4.3.1
The burner body
4.3.2
Feeder F2 including the drive
4.3.3
Impulse sensor
4.3.4
Flexible hose
4.3.5
Primary fan
4.3.6
Electric resistance spiral for automatic ignition
4.3.7
Cover of spiral
4.3.8
Burner grate
Picture No. 8 Burner
The burner body
– is a hollow weldment made from highly legated material with a bottom transversal fuel inlet. The
fuel is delivered by a built-in
F2 feeder
driven by an electric motor with a gearbox.
A set of slit and round jets in the burning grill ensures inflow of air in order to facilitate controlled full burning of delivered
fuel during its stay in the burner chamber. The burned out fuel is subsequently pushed over the edge of the chamber into
the ash receiver.
The inner space of the burner body is connected to an
air fan
, whose revolutions can be regulated within a large range
depending on the required boiler output or the type of fuel being used.
Impulse revolution sensor
The gearboxes of the F1 and F2 feeders are equipped with impulse sensors, which ensure safe operation of the boiler.
Connecting hose to the F1 feeder
made of inflammable material connect Feeder F1 and Feeder F2. It is part of the
transfer fuel lines. It must meet strict installation rules:
It cannot have significant folds, which would block smooth fuel movement and must be built with inclination of minimum
50º (in a relation to horizontal plane).
Attachment to both adaptors must be tight.
Cleaning burner provides removal of excessive ash or cinder volume from the burner when burning lower
quality fuel. The drive of the cleaning mechanism works together with ash cleaning.
4.3.3
4.3.1
4.3.8
4.3.2
4.3.4
4.3.5
4.3.6
4.3.7
Summary of Contents for KP 12S
