VISIT WWW.THEPONDBOSS.NET FOR PRODUCT INFORMATION AND TIPS.
2
EN
Part
Description
Qty
A
Pump
1
B
Inlet Screen
1
C
Flow Control
1
Step 1.
Connect the flow control
to the outlet of the pump and
attach tubing to the flow control.
Also attach the inlet screen to the
inlet of the pump.
NOTE: Tubing is not included.
CAUTION
• This pump has been evaluated for use with fresh water only.
• Use a proper power source as indicated on the pump label.
• Keep the cord away from high temperatures or other heat sources.
• Do not pump heated liquids.
• Do not let the pump run dry. Pump must be completely submerged for proper
operation and cooling.
• Operate in freshwater only. Avoid heavily chlorinated water and water with high pH
levels.
• Do not lift the pump by its power cord.
PACKAGE CONTENTS
PREPARATION
Before beginning assembly or operation of product, make sure all parts are present.
Compare parts with package contents list and diagram. If any part is missing or
damaged, do not attempt to assemble, install or operate the product. Contact Customer
Care for replacement parts.
• Estimated assembly time: 5 minutes
• No tools required for assembly.
OPERATION INSTRUCTIONS
1
pump assembly if damage is found.
• Do not remove the grounding pin from the power cord plug.
• Risk of electrical shock – This pump has not been investigated for use in
swimming pool or marine areas.
