background image

PLEASE CALL CUSTOMER CARE BEFORE RETURNING ITEM TO STORE: 1-888-755-6750

1

EN

Pressurized Pond Filter with UVC

Questions, problems, missing parts? 

  1-888-755-6750

  customercare@thepondboss.net

 

 

Monday - Friday

Visit thepondboss.net for a step by step guide and videos

WARNING

•   WARNING – Improper connection of the appliance-grounding conductor can result in 

a risk of electric shock. Check with a qualified electrician or service representative if 

you are in doubt whether the appliance is properly grounded. Do not modify the plug 

provided with the appliance; if it will not fit the outlet, have a proper outlet installed by 

a qualified technician.

•  Do not operate any appliance if it has a damaged cord or plug, or if it is malfunctioning 

or if it is damaged in any manner.

•  Always unplug the appliance from the outlet before putting on or taking off parts, 

before cleaning or when not in use.

•  Connect only to a circuit that is protected by a ground-fault circuit-interrupter (GFCI).
•  Risk of Electric Shock - Do not use the UV filter if the quartz tubing around the lamp is 

broken. Immediately unplug and seek an authorized repair service or discard the unit.

•  GROUNDING INSTRUCTIONS – This appliance must be grounded. In the event of 

WARNINGS AND CAUTIONS

IMPORTANT SAFETY INFORMATION

Please read these instructions carefully prior to starting up the unit!
The water system on which the operation of this product is based requires utmost care and 
maintenance, possibly also the use of chemicals, in order to prevent and keep the occurrence of 
micro-organisms and harmful bacteria, especially legionellae that are responsible for legionnaire’s 
disease, under control. Non-observance of this information about correct maintenance and care 
can entail the spreading of harmful bacteria. Due to the fact that for decorative purposes, water 
nozzles distribute water in the air, water droplets containing harmful bacteria can enter your lungs 
and cause life-threatening diseases. 
It is the responsibility of the owner of the water system and its attendant units to ensure their 
maintenance and care in compliance with the laws, directives and instructions laid down for this 
purpose. In order to avert harmful contamination, we urgently recommend the user to ensure 
cleaning and care of the water system and the water feature including the nozzle, and to take 
all necessary measures to maintain the technical units, such as pumps, tubing, connectors, 
under-water lighting, and nozzles to keep them in functional order in line with safety aspects. 
However, the maintenance and care obligation is not limited to the technical products supplied, but 
encompasses the entire system. 
We also recommend the owner to keep records of the dates when maintenance and care was 
carried out, and to document all water tests made in conjunction with the water feature. The 
owner is solely responsible for guaranteeing the safety of the water feature. Use or maintenance 
of the units sold and the system are beyond GeoGlobal Partner’s influence. GeoGlobal Partners can 
only be held liable for manufacturing faults of pond boss® units.

Summary of Contents for 52387

























Reviews: