PLEASE CALL 1-888-755-6750 BEFORE RETURNING TO THE STORE.
WWW.THEPONDBOSS.NET
PREPARATION
Before beginning assembly or operation of product, make sure all parts are present. Compare parts with
package contents list and diagram above. If any part is missing or damaged, do not attempt to assemble,
install or operate the product. Contact customer service for replacement parts.
•
Estimated Assembly Time: 5 minutes
•
No tools required for assembly.
ASSEMBLY INSTRUCTIONS
1. For use alone, place the light rings in or out of the water then
skip to step 6.
For attached to the
pond boss® large nozzle
kit(item# NLFTN) or extra large nozzle kit(item #NXLFTN),
assemble connector to the light ring you want attached to
nozzle kit. Fig. 1
NOTE: Nozzle kits are NOT INCLUDED.
Fig. 1
2. Disassemble the nozzle head from nozzle kit. Fig. 2
NOTE: Nozzle head and nozzle kits are NOT INCLUDED.
Fig. 2
3. Assemble correct nozzle tube adaptor to light ring assembly,
then attached the light ring assembly to extension tube.
Fig. 3
NOTE: Extension tube is NOT INCLUDED.
Fig. 3
For # NXLFTN
For # NLFTN
For # NXLFTN For # NLFTN
Nozzle tube
adaptor for
#NLFTN
Nozzle tube
adaptor for
#NXLFTN
