PLEASE CALL 1-888-755-6750 BEFORE RETURNING TO THE STORE.
WWW.THEPONDBOSS.NET
4. Assemble the nozzle head back to nozzle kit. Fig. 4
NOTE: Nozzle head and nozzle kits are NOT INCLUDED.
Fig. 4
5. Light rings can use in or out of the water, adjust the light ring
up and down to the desire location, then put other light rings
in or out of you pond as need. Fig. 5
Fig. 5
6. Connect the light rings to the sensor by pushing the plug into
the sensor socket until it is firmly seated. Hand tighten the nut
from the plug to the socket. Fig. 6
Fig. 6
7. Connect the sensor to the transformer by pushing the plug
into the transformer socket until it is firmly seated. Hand
tighten the nut from the plug to the socket. Fig. 7
Fig. 7
Transformer
Plug from
sensor
Sensor
Plug from
light rings
For # NLFTN
For # NXLFTN
For # NXLFTN
For # NLFTN
