background image

PLEASE CALL 1-888-755-6750 BEFORE RETURNING TO THE STORE. 

                      WWW.THEPONDBOSS.NET

 

8.  Make sure that the transformer and sensor are NOT 

submerged.  Make sure that the light sensor faces up.  Fig. 8 

 
 

NOTE:  At night, the lights will automatically turn on.     

 

             At sunrise, they will automatically turn off. 

                                                                                                                                       

                                             
 

      Fig. 8 

9.  Plug the transformer into a properly grounded electrical outlet.  

Fig. 9 

 
 
 
 
 
 
 
 

 

      

Fig. 9 

TROUBLESHOOTING  

 

If light ring fail to illuminate, check that light ring are getting power by testing another appliance in 
the same power outlet. 

 

The light ring is designed to turn on when it gets dark, and turn off when it gets light. To activate 
the light during daylight hours, cover the sensor. 

 

If light ring do not turn off during daytime, check  sensor.  Make sure the sensor faces up and is not 
covered by dirt or debris. 

 

CARE AND MAINTENANCE 

 

Periodically, your light ring may require cleaning for optimal performance. 

 

Cleaning should only be done with warm soapy water.  Be sure to use biodegradable soap. 

 

The frequency of cleaning depends upon the conditions of the environment where lights are used. 

 

REPLACEMENT PARTS LIST  

 

For replacement parts, call our customer service department at 1-888-755-6750, 8 a.m.-6 p.m., EST,  
Monday-Friday, or email us at customercare@thepondboss.net. 

 

 
 
 
 
 
 
 
 
 
 

 

 

 

 

 

 

 

        Printed in China 

Part 

Description 

Light rings 

Sensor 

Transformer 

Connector 

Nozzle tube adaptor for 

#NLFTN 

Nozzle tube adaptor for 

#NXLFTN 

 

 

 

 

Sensor 

(Must face up) 

 

GFCI 

Summary of Contents for LRING3






Reviews: