PondMAX 24PL684, Instruction Manual

WAT E R G A R D E N I N G   T O   T H E   M A X

P O N D M A X . C O M

WARM WHITE LED 

LIGHTING SYSTEM

• If required, have a qualified electrician install an outdoor GFCI protected hooded flush type cover plate receptacle 

marked “Wet Location” and following the requirements above. 

• Route fixture cable to desired fixture locations. CAUTION: Fixture(s) must be installed in accordance with all local 

codes and ordinances. 

• Follow the remaining steps in this manual before plugging in the transformer to a GFCI outdoor electrical outlet 

that has a weather-resistant cover. Do not use an extension cord to supply power to transformer. 

TRANSFORMER INSTALLATION

Install the Transformer unit 10 feet (3.05 m) or more from a water feature and 12 inches (0.3m) above the ground. 
Mount the Transformer to a secure object such as a post or the side of your home. (See diagram below)

TRANSFORMER ADAPTER CABLES

INSTALLATION

• Connect your 3ft. transformer adapter cable (2) plug to the outlet side of the transformer (1) and tighten the rubber 

nut to ensure a safe connection. 

• The transformer adapter cable can also be cut and spliced rather than light cable, to allow connection to any other 

approved 12volt AC transformer. This will not void the warranty of the lighting system.

MAINTENANCE

• Do not submerge the transformer adapter cable. 
• Check that the connections on the transformer adapter cable are tight on a periodic bases. 

MAINTENANCE

• Do not submerge transformer.
• Do not repair, or tamper with the power cord or plug.
• Keep transformer free of debris and/or plant life to reduc

e the risk of fir

e. 

* ALL PICTURES SHOWN ARE FOR ILLUSTRATION PURPOSE ONLY. ACTUAL PRODUCT MAY VARY

1.

2.

4