background image

PMAX All In One Instructions.indd   2

9/03/2016   9:20 AM

60 Hz

115 

V

olt

13 

W

att

57 Watts

8 Ft.

660 GPH

Cable Length

30 Ft.

Outlet

 Ø 

(Inch)

1/2", 3/4", 1"

Frequency

The PondMAX All-In-One SF650 Filter System is designed to clean ponds and water features utilizing the latest 
technology

 as follows:

Mechanical & Biological Filtration

13 Watt Ultraviolet Clarifier for prevention 

of unsightly organtic matter.

Powerful 660 GPH pump with wear 

restant components. 

Dual Flow Control T-Piece

Multiple fountain nozzles help aerate water.

Low-Voltage Power System for safe in-pond 

operation. 

Any damage of the equipment or unmerited operation will 

bring dangerous UV Rays to the skin and eyes. So if there 

is any damage of the equipment, it must not be used. The 

equipment should always be out of reach of children.

P O N D M A X . C O M

For your safety, disconnect from the power supply 

before any maintenance of any equipment 

in

 pond is 

attempted.

Be sure the equipment is submerged completely in the 

water. The depth should not be greater than 3ft.

Do not operate the pump if the appliance or any 

component of the system, such as power cable, have 

been da

ma

ged.

For safety, always plug the pump into an electrical 

outlet with a (GCFI) Ground Fault Circuit Interrupter.

To avoid an electric shock, do not attach the plug to the 

power supply socket with wet hands. The drip loop 

method should be used to prevent water from traveling 

down the cable and onto the plug or power supply. 

If the plug does get wet, do not unplug the cable. 

Disconnect the circuit breaker that supplies power to 

the power supply point. Then unplug and examine the 

plug and power supply point for presence of water. If 

the power point has become wet, you should consult an 

electrician before using the power point again. 

Always unplug the pump from the power supply when 

not in use

or before performing any maintenance on the pump or 

in the pond. Never pull the cable to disconnect the plug 

from the power supply. Grasp the plug and pull firmly to 

disconnect

.

Always unplug the appliance from the power supply 

when not in use or before performing any maintenance.

If required, have a qualified electrician install a 

weatherproof power supply near the pond or water 

feature (within the cable length of the SF650). 

Do not install or store the unit where it will be exposed 

to extreme hot or cold temperatures. Do not use in 

water temperatures that exceed 95°F.

Do not cut the cable as this may result in voiding your 

warranty.

Care should be taken to arrange the power cable so 

that it cannot be accidentally tripped over or pulled.

Do not attempt to repair the electrical appliance 

yourself. Return to a PondMAX authorized dealer or 

original place of purchase if a fault occurs, (regular 

maintenance is not considered repair and is required by 

user).

Summary of Contents for ALL-IN-ONE SF650









Reviews: