or “ “. Then press “ “ to save
the setting and then enter P3.
5
or press
“ “ without saving and return to P3.
0
MIN/MAX
SET
ESC
While in P3.
5
, the current hour setting
will blink
(
Fig.14). To
change the
setting,
press“
LOG/
“ or “ “. Then press
“ “ to save the setting and then enter
P3.
6
or press “ “ without saving and
return to P3.
0.
MIN/MAX
SET
ESC
Repeat above step to finish the minute
setting in P3.
6
.
Year Month Date
Hour Min
Year Month Date
Hour Min
Fig
.
13
Fig.14
10
P4.
0
RESET
Press “
LOG/
“ in P1.
0
three times to
access P4.
0
to revert the meter to
defaut status(Fig.15). Press “ “ and
it goes into P4.
1
with blinking “ No”
default (Fig.16) on the lower middle
display. To switch the status, press
“
LOG/
“ or “ “. Then press “ “
to save the setting or press “ “
without saving and return to P4.
0
SET
MIN/MAX
SET
ESC
Fig
.
15
Fig.16
Choose “Yes”, the meter is reset to the
following defaults:
