User manual
PONSEL
Reference: NOTICE_ACTEON_2010_v001-UK
V: 001
6/56
1 The measuring system
1.1 The basic system
At a minimum, a measuring system requires the following elements:
1.1.1 A pH and temperature transmitter
PONACTEON2010
ACTEON 2010 transmitter - pH-meter and thermometer
The pH and Temperature transmitter comes complete with :
•
a pH 7.01 buffer solution,
•
a pH 4.01 buffer solution,
•
instructions.
1.1.2 A pH sensor
Two sensors are available depending on use :
PONCPC-PHL-10
Electrolyte plastogel® pH sensor with 10-metre cable
and LEMO connector (perch-mounted or mounted inside
a pipe)
In cold liquids with very low conductivity (less than 50 µS/cm) or contaminating media, it is
recommended to use a filling sensor with bridge.
PONCPC-PHL-RV-10
Glass-bodied pH filling sensor with 10- metre cable and
LEMO connector
1.1.3 A temperature sensor
PONCPC-T-10
Temperature sensor with 10-metre cable (perch-
mounted or mounted inside a pipe)
