ASSEMBLY INSTRUCTIONS
STRAIGHT GRAB BAR WITH HAND SHOWER
HOLDER
ANTIMICROBIAL
STANDARD ADA
TESTED PRODUCT
RECYCLABLE AND RECYCLED PRODUCT
ELECTRICAL INSULATION
NON-SLIP
Thank you for purchasing this Ponte Giulio item. This
product has been manufactured in respect of the
environment and safety requirements.
Ponte Giulio USA, Inc
W241 S4021 Rockwood Circle Waukesha
WI 53189 – USA
Phone +1.877.766.8301 * fax +1.877.766.8306
Web Site:
www.pontegiuliousa.com
Email:
usa@pontegiuliousa.com
CODE
L
G02JAS12
18”
3,09
1.100 lb
G02JAS13
24”
3,64
1.100 lb
G02JAS14
36”
5,16
1.100 lb
G02JAS16
42”
6,33
1.000 lb
= l
b = Rated load
= lb = Net weight
= Read this manual carefully and store this manual
= No percussion
1
2
3
4
6
5
7
WARNING!
THE FOLLOWING STEPS REQUIRE DRILLING INTO
THE WALL.
When drilling into the wall, exercise care to avoid any
electrical wiring or plumbing that may be located behind
the wall. Damaged electrical wiring can cause electrical
shock and/or fire. Since older homes do not always fall
in line with current housing codes and requirements,
know where internal wall wiring is located so that no
wires will interfere with your installation.
PROPER INSTALLATION IS EXTREMELY IMPORTANT.
IF IN DOUBT, INSTALLATION SHOULD BE DONE BY A
QUALIFIED PROFESSIONAL.
L
8
