2-17
Before your vehicle was shipped from the factory, it was
programmed in Mode 4. The mode to which the vehicle
has been programmed may have been changed since it
left the factory. To determine the mode to which your
vehicle is programmed or to program your vehicle to a
different mode, do the following:
1. Follow the instructions for “Entering Programming
Mode” listed previously.
2. Press the top of the power door lock switch.
3. Count the number of chimes you hear. The number
of chimes indicates the vehicle’s current programmed
mode. If you do not wish to change the current mode,
you can either exit the programming mode by
following the instructions later in this section or
program the next feature available on your vehicle.
4. Press the top of the power door lock switch to
change the current mode.
5. Press the top of the power door lock switch until you
hear the number of chimes corresponding to the
mode selection you want.
The mode you selected is now set. You can either exit
the programming mode by following the instructions
later in this section or program the next feature available
on your vehicle.
Delayed Locking
This feature allows you to lock and unlock the doors
automatically.
Programmable Modes
Mode 1: Off (Doors will always lock immediately when
you lock the doors using the power door lock switch or
the optional remote keyless entry transmitter.)
Mode 2: Delayed Locking (If the power door lock
switch or the optional remote keyless entry transmitter is
used to lock the vehicle while any door is open, you will
hear three chimes. The doors will not lock. Five seconds
after the last door is closed, all doors will lock. If you
press the lock button twice, the doors will lock
immediately.)
Before your vehicle was shipped from the factory, it was
programmed in Mode 2. The mode to which the vehicle
has been programmed may have been changed since it
left the factory. To determine the mode to which your
vehicle is programmed or to program your vehicle to a
different mode, do the following:
1. Follow the instructions for “Entering Programming
Mode” listed previously.
2. Press the bottom of the power door lock switch.
Summary of Contents for 2002 Aztek
