POOL FROG
®
Cycler Maintenance
•
Turn control dial back and
forth as you pull it out of the
housing.
•
In the back of the POOL
FROG
®
Cycler depress center
of locking pin with a finger and
pull pin out of dial.
•
Replace both o-rings. Apply
silicone lubricant that came with
your POOL FROG
®
Cycler on
o-rings.
•
Carefully insert control dial
back into housing.
•
Replace locking pin by
pushing it through the slots on
the dial until it locks into place.
COPY
COPY
COPY
COPY
OTHER COPY?
SILICONE
LUBRICANT
Replacing Cap O-Ring
•
Hold cap in front of you
upside down with the o-ring
groove facing up. Place one
end of o-ring into cap groove
at the point closest to you.
Hold o-ring down with the
thumb and forefinger of one
hand.
•
Take hold of the far end of
the o-ring with the thumb and
index finger of the other hand.
Roll o-ring slightly back
towards you as you stretch
the o-ring into the remainder
of the cap groove.
•
Lubricate o-ring often with
silicone lubricant that came
with your POOL FROG
®
Cycler. DO NOT USE
petroleum based lubricants.
Replacing knob
COPY
COPY
COPY
COPY
xxxxx
SLICONE
LUBRICANT
•
T
o replace, simply unscrew
old knob and replace with the
new one.
Back of
POOL
FROG
®
Cycler
Front of
POOL
FROG
®
Cycler
1.
2.
3.
4.
5.
1.
2.
3.
12
Replacing the Control Dial O-Rings
Center of locking pin
