Above Ground Filter Installation
Apply tape to each threaded
end of nipple.
Screw one end of nipple
into the filter return.
Screw either side of
POOL FROG
®
Cycler on
to open nipple end until
upright and secure.
Tighten turning
1 to 2 revolutions with wrench.
DO NOT OVER TIGHTEN.
Tighten turning
1 to 2 revolutions
with wrench.
DO NOT
OVER TIGHTEN.
Bi-flow valve
design allows
water flow in
either
direction.
HOSE ADAPTER
4.
5.
6.
1.
2.
3.
7.
MATERIALS NEEDED
One
Hose
Clamp
Corrosion Resistant
Check Valve
RECOMMENDED
INCLUDED WITH
POOL FROG
®
CYCLER
14
Apply tape to
threaded end of hose
adapter.
Screw adapter into the other
side of POOL FROG
®
Cycler.
Attach return section of hose
to the adapter with clamp.
Tighten clamp with
screwdriver.
TOOLS NEEDED
Screwdriver
If using a POOL FROG
®
Bac
Pac, installing a corrosion
resistant check valve is
recommended.
Tape
One Hose Adapter
1 1/2"
X
1 1/2"
X
1 1/4"
One 6"
X
1 1/2" TBE
PVC Nipple
One Section of
1 1/2" Flex Hose
(provided with filter)
Pipe Wrench
