WARRANTY CONdITIONS
POOLRITE EQUIPMENT PTY LTD
POOLTHERM P-SERIES HEAT PUMPS
Your Pool Therm P-Series Heat Pump is manufactured to the highest possible standards and most-up-to-date technology.
Accordingly the equipment carries the following Warranty, should a fault occur due to faulty manufacture or materials.
Important:
In the event of a fault occurring, covered by this Warranty, the purchaser must, in the first instance, contact
Poolrite Equipment Pty Ltd or the nearest authorised Poolrite Distributor.
Pool Therm P-Series Heat Pumps:
1. All components in the Heat Pump, with the exception of the Heat Exchanger, carry a full one year, (12 months)
Warranty from the date of purchase by the original owner.
2. All components in the Heat Pump, with the exception of the Heat Exchanger, carry an additional 1 year,
(12 months) parts only Warranty from the date of purchase by the original owner.
3. The Titanium Heat Exchanger carries a Warranty of 5 years, (60 months). The terms of this Warranty covers full
replacement cost, i.e. parts and labour, of a defective Heat Exchanger for 1 year, (12 months) and an additional
4 years, (48 months) on Heat Exchanger parts only, from the date of purchase by the original owner.
No claim in pursuance of this Warranty will be recognised unless received by Poolrite during the Warranty period.
4. The warranty is void if the following are not adhered to:
• The Heat Pump must be installed and used in accordance with the instructions supplied. NB:
a) Filtration equipment and circulating pumps are installed in-line before the Heat Pump.
b) Chemical additives and chlorine generating equipment are installed in-line after the Heat Pump.
c) Chlorine electrolyzer cathodes are earthed.
d) Electrical connection complies with the relevant standards.
• The Heat Pump is designed to be used with swimming pool or spa pool water, chemically balanced in accordance
with the Langelier Index with a pH of 7.0 to 7.6 that is regularly treated with a sanitising system utilizing chlorine
either added in compound form or generated in situ in concentrations as recommended by the relative State Health
Departments. Should other chemical treatment systems or parameters be used, Poolrite will not be responsible for
damage done by corrosion, scaling and stress cracking of the equipment.
• If, in the opinion of Poolrite, the equipment has been subjected to other than normal swimming pool or spa pool use
or has been improperly serviced or maintained.
5. This Warranty is applicable to workmanship and materials only. Poolrite will replace, at no charge, all parts returned
freight paid, which display faulty workmanship or materials in accordance with the conditions above. Poolrite
Equipment Pty Ltd accepts no responsibility for loss, damage or injury to person or property arising from Warranty
failure of equipment, unless with the express authority of Poolrite or its authorised Distributors and this Warranty shall
not extend to any expenditure otherwise incurred.
