poolstar Z-RAY DRIFT, Manual

PK6-20-GB

www.zraysports.com

4

5

www.zraysports.com

PK6-20-GB

Hull inflation:

1.Unfold and flatten the canoe and 

install the footrest.

2.Check the air valves 

①

, 

②

 and 

③

and the bottom water drainage plug, 
which must be in the closed positions.

Installation

• Ensure you know and understand the local laws, regulations and hazards 

associated with water sports and inflatable kayak operations. 

• Please check local weather forecasts, local currents, tides and wind conditions 

before use and only paddle in calm conditions. 

• Regardless of the weather conditions, you must wear PFDs in good condition and 

in line with local laws and regulations.

• Learn about the basic safety self-help methods: How to flip the kayak over? How 

to get on the kayak again? 

• Tell someone when you plan to return. 

• Ensure all passengers understand the basic operations of the inflatable kayak.

• Make sure at least one passenger can operate the inflatable kayak in an 

emergency.

• Wear suitable clothing (helmets, shoes, sunscreen). Take enough water and food 

and towing cables along with all items required by law. 

Preparation before departure

Maintenance

1. After use, please clean your inflatable kayak to prevent it from being 

damaged by sand, salt water or sunlight.

2. Clean the inflatable kayak with a soft detergent and water.
3. Do not use solvents such as gasoline as they can corrode the surface 

materials or plastic parts of the kayak.
4. Make sure that the hull is completely cleaned and dry before storing 

otherwise it may develop mold.
5. Once deflated, fold the kayak, place in the backpack and store in a dry, 
ventilated place above 15°C.

Repair

Small holes or punctures can be repaired with the repair kit that is provided 

in conjunction with the kayak. 

1. Do not inflate the kayak
2. Wipe the hull with soap and water to find holes in the kayak. The soap will 
bubble over the hole. 
3. Clean the area around the hole with water or alcohol. 
4. Use a pencil to sketch out the outline of the patch. 
5. Cut a patch of a suitable size. 
6. Apply glue evenly to the damaged area and patch and then press and 

hold the patch to the damaged area.

7. Leave the kayak for at least 24 hours or more before inflating it. 

If the valve is damaged, please follow the below instructions for replacing it.

Valve Replacement

Hull installation:

1. Inflate the seat, until you feel the seat is 100% inflated. Be careful not to make the seat 
overinflated.

2. Install the seat.

3. Install the fin. 

4. Install the paddle. 

3.Inflate the air chambers 

①

, 

②

 and

③

 to 100% (8 PSI) respectively in turn

.

11