Page
12 of 25
POP-UP PUSH 8 ECO
Operator’s Safety and Maintenance Handbook ( rev.0.0.1.0210)
Section 4
OPERATING INSTRUCTIONS
position ‘2’ is for charging the machine.
Entering and leaving the work
platform
Always use three points of contact when entering or exiting the platform, using the
handholds provided. For example, use two hands and one foot, as shown below.
Use the step provided on the base of the machine.
On entering the platform, ensure that the gate is closed behind you.
Control pendant
The control pendant houses the platform raise and lower controls.
Pressing the enable button and selecting ‘UP’ raises the platform.
Pressing the enable button and selecting ‘DOWN’ lowers the platform.
To avoid crushing and shearing hazards, a delay feature is fitted which
actuates when the platform is lowered to the transport position. The platform
will momentarily stop to enable the operator to look around the machine to
determine whether any persons are adjacent to the scissor mechanism. After
a time delay, the lowering control will be enabled once more to permit the
operator to continue to lower to the transport position.
