Page
13 of 25
POP-UP PUSH 8 ECO
Operator’s Safety and Maintenance Handbook ( rev.0.0.1.0210)
Section 4
OPERATING INSTRUCTIONS
Take care to avoid repeated jerky movements which could cause unnecessary
impact loads on the structure.
Emergency stop
An emergency stop button is provided on the control pendant. Once depressed,
this isolates power to the raise and lower functions.
To restore functionality, twist the emergency stop button clockwise to release the
button, as shown below.
Turning the Power Selector to the ‘0’ position also has the effect of isolating power
to the raise and lower functions.
Emergency lowering
1.
Pull out Plunger ‘A’ and rotate through 90 degrees.
2.
Turn valve ‘B’ anticlockwise until platform starts to lower. To stop the platform at
any time, turn valve clockwise until platform stops descending.
3. Once platform has descended fully, please ensure valve ‘B’ is closed off by
Plunger ‘A’
Valve ‘B’
