70
// Popcorn Hour A-210
5. Restart the unit.
Note: To restart the unit, press the POWER button for 3 seconds to allow the internal HDD (if installed) to
turn off. Once the POWER button ring light turns red, switch the unit off using the Power
ON/OFF
switch at the rear panel and unplugging the power cord. Wait for 60 seconds before reconnecting
the power cord and switching the unit on using the Power
ON/OFF
switch. Press the POWER button
to start the NMT. Once the Media Source screen appears on your TV, the restart is completed.
6. Plug the USB flash memory device into a USB port on your NMT. Use the Media Source screen
to select the USB flash memory device.
7. Locate the file
usbupdate-firmware release date.html
and press
ENTER
on the remote
control to select it.
8. A screen with the firmware version will be displayed. Press
ENTER
again to start the firmware
update.
9. Do NOT turn off your NMT while the update is running, as it will cause your NMT to stop working.
10. Your NMT will restart when the update is completed.
