94
// Popcorn Hour A-210
Q4: (HDMI Mode) During initial setup, no display or video signal detected.
1. Disconnect the HDMI connection and connect your NMT to your TV using a Composite Video
connection
2. Restart the NMT and wait for the loading screen to appear
3. Wait until the screen goes blank
4. Press
TV MODE -> 1
for NTSC or
TV MODE -> 2
for PAL on your remote control to force a
video output mode.
5. Once the menu screen is visible, go to
Setup > Audio/Video
and set up the proper HDMI
output mode for your TV and then SAVE the selection.
6. Remove the Composite Video connections and reconnect the HDMI connectors to the NMT and
your TV.
7. Restart the NMT.