background image

 

 

 

Manage devices  

Pressing the „Manage“ button 

[ill.7] 

opens device management screen. Here you can see the connected devices‘ 

status. Furthermore, you can open every device’s own configuration menu.  
 

 

ill. 9: Open Z-Wave device list (

), check battery status (

), check network status (

Battery status:

 The tab 

Battery status

 

[ill.9 (2)] 

gives you an overview about every battery powered device’s battery 

status within your Z-Wave network. Normally Z-Wave device’s battery have a life of 2 to 5 years. In addition to this 
overview list you will receive a warning message in the event list (see also chapter 

Event List

).     

Configuration

: In the „Z-Wave devices“ tab 

[ill.9 (1)] 

you can click every listed device to open its appropriate 

configuration view. Here you can – for example – rename, hide and unhide the device and assign to rooms. After 
including a new device, the settings will be opened automatically (see also chapter 

Configuration Menu / Add new 

devices

).      

Some Z-Wave devices have special configuration parameters which help to adjust the device to the user’s needs. Use 
the button “Hardware configuration” in the configuration view. These parameters refer to the physical device only. 

Network status:

 If there occur a problem with one device (defect, low battery, missing device, communication 

errors…), it will be displayed here. Use the appropriate link to get further information about the problem and possibly 
opportunities to solve the problem. 

Rooms  

At first you can create new rooms in this area. Additionally, it’s possible to assign an individual picture to every room as 
well as all devices installed in the appropriate room. All assignments can be changed anytime. 

 

ill. 10: Room overview 

Summary of Contents for 011801














Reviews: