PORSCHE DESIGN PDT40, User Manual

The LEDs on both earpieces flash 

white and blue alternately.

Pair the earpieces with your 

Bluetooth device for the first 

time

Slide open the charging box cover.

Make sure the earpieces are fully charged 

and powered on.

Single earpiece (Mono mode)

Take either right or left earpiece out from 

charging box for mono use. The earpiece will 

power on automatically. You will hear a voice 

from the earpieces saying "Power on".  

Note

Note

 

After powering on, if the earpieces cannot find any 

previously connected Bluetooth device, they will 

automatically switch to pairing mode.

Note

 

Take the second earpiece from the charging box and 

they will pair with each other automatically.

 

The earpieces store four devices in the memory. If you 

try to pair more than four devices, the earliest paired 

device is replaced by the new one.

Pair the earpieces with 

another Bluetooth device

The earpieces are now in pairing 

mode and are ready to pair with a 

Bluetooth device (e.g. a mobile 

phone).

Turn on the Bluetooth function of your 

Bluetooth device, select Porsche 

Design PDT40.

Turn on the Bluetooth function of your 

Bluetooth device.

Pair the earpieces with your 

Bluetooth device. Refer to the user 

manual of your Bluetooth device.

The following example shows you how to 

pair the earpieces with your Bluetooth 

device.

If you want to pair another Bluetooth device 

with the earpieces, make sure the Bluetooth 

function on any other previously paired device 

is turned off. Place earpieces into your ears, 

then press and hold the buttons on both 

earpieces for five seconds. Release when 

'Pairing' voice prompt is heard.

Enter the earpieces' password "0000" (four 

zeros) if prompted. For those devices 

featuring Bluetooth 3.0 or higher, there is 

no need to enter a password.

Porsche Design PDT40

1

2

2

3

1

4

6 EN