54
Care Instructions
GB
Cleaning
d
Caution!
Risk of damage due to improper cleaning.
f
Please observe the instructions on the cover’s
laundry label. If the cover is washed at a
temperature higher than 30°C (86°F), the
cover fabric may bleed.
f
Do not spin-dry the cover and never dry it in
an electric dryer (the fabric could separate
from the cushion).
You can remove the cover and machine-wash
it with mild detergent at 30°C (86°F) in the
gentle cycle.
You can clean the plastic parts, belts and
shoulder pads with a soap solution. Do not use
any aggressive agents (e.g. solvents).
Removing and Fitting the Covers
The cover for the Porsche Junior Seat ISOFIX
consists of two parts. The Porsche Junior Seat
ISOFIX must be taken out of the vehicle in order
to remove the covers.
Removing the Headrest Cover
1. Tilt the headrest forward.
2. Remove the headrest cover
(20)
.
3. Thread the headrest cover out of the belts.
PJSI_Stuetzfuss_GB.book Page 54 Thursday, May 14, 2009 7:15 PM