56
Care Instructions
GB
6. Fold the back part
(9)
of the seat cushion
cover onto the seat surface.
7. Thread the belts out of the openings in the seat
cushion cover.
8. Disengage the elastic seat cushion cover edge
at the lower edge of the seat shell.
9. Pull the cover over the trim
(35)
of the belt
adjuster from below.
10.Thread the buckle
(24)
and the belt end
(36)
out of the seat cushion cover.
11.Pull the seat cushion upward slightly and then
place its opening over the headrest
(20)
.
PJSI_Stuetzfuss_GB.book Page 56 Thursday, May 14, 2009 7:15 PM