62
Care Instructions
GB
Remedy:
This is how to wash out the buckle to make it
function properly again.
1. Remove the buckle.
f
Loosen the belts.
f
Open the Velcro fastener on the groin pad and
remove it.
f
Move the child seat to idle position.
f
Disengage the elastic seat cushion cover edge
at the lower edge of the seat shell.
f
Pull the seat cushion cover off the lower
seat shell.
f
Push the Triglide
(30)
with which the
buckle
(24)
is fastened to the seat shell
upright through the belt slot
(31)
.
2. Wash out the buckle.
f
Soak the buckle
(24)
in warm water with
detergent for at least one hour. Then rinse the
buckle out and allow it to dry thoroughly.
PJSI_Stuetzfuss_GB.book Page 62 Thursday, May 14, 2009 7:15 PM