102
Lights, Direction Indicators and Windscreen Wipers
The rain sensor remains switched off if the wiper
stalk is already in position
1
when the ignition is
switched on.
To switch the rain sensor on again:
f
Move wiper stalk to position
0
and then to
position
1
– switching on is confirmed by one
wipe of the windscreen –
or
f
Operate windscreen washer system
5
–
switching on is confirmed by three wipes of the
windscreen –
or
f
Change the sensitivity of the rain sensor with
four-stage switch
A
.
Changing the sensitivity of the rain sensor
Sensitivity can be set with switch
A
in 4 stages:
f
Move rotary switch
A
upwards –
high sensitivity.
The setting is confirmed by one wipe of the
windscreen.
f
Move rotary switch
A
downwards –
low sensitivity.
2 – Front windscreen wiper – slow
f
Move wiper stalk upwards to the second click.
3 – Front windscreen wiper – fast
f
Move wiper stalk upwards to the third click.
Rain sensor operation is automatically activated at
speeds of less than approx. 4 km/h
(2.5 mph) if
the windscreen wiper is switched on. If you exceed
a speed of approx. 8 km/h (5 mph), the system
switches to the preselected wiper speed.
4 – Front windscreen wipers – one-touch
operation
f
Press the wiper stalk downwards. The front
windscreen wipers carry out one wiping cycle.
Summary of Contents for Turbo 2007
Page 105: ...104 Lights Direction Indicators and Windscreen Wipers ...
Page 107: ...106 Multi Purpose Display and Instruments ...
Page 347: ...346 Index ...