Page 2
Installation
Please check your package that included the following items:
-Base Unit (Flx2000/PRO2000)
-Wireless Headset (XTreme)
-AC / DC adaptor for Base Unit
- Base packing batterie
- Headset packing batterie
Choose a suitable site for the base unit, make sure it is not near to other electrical equipments.
Connect the AC adaptor socket to the Base Unit and to your room
’
s power socket.
Turn on the power of base.
Fitting the battery in the headset:
The pack rechargeable batteries come with your
charger
.
-Insert the rechargeable battery into the headset as the above figure indicated, matching correct polarity.
-Fit the battery compartment cover by sliding it down so that it clicks firmly into place.
NOTE:
Reversing the orientation may damage the headset.
Please use the battery type supplied or recommended equivalents. A
different battery could cause an explosion or damage of your headset.
Low battery indicator
Whenever you see the low battery
indicator LED
flash on the headset, or you have heard the low battery warning
tone during a call conversation, please:
-End the call as soon as possible.
-Change the headset battery.
To charge the battery, put the battery into the charger cradle. The charging LED on charger unit will come on to
indicated that the battery is in charging.
Basic Functions
3.7v battery pack
Power on/off
AC Adapter socket
Charging indicator
And low battery indicator
6.0v-7.5v battery pack
