PMP400 USER MANUAL
Portable Electronics Ltd © 2008
20/27
automatically shut down when finished.
•
Ensure the correct Mode, i.e. PAL/NTSC is set according to your requirement.
•
It is recommended to leave the charger connected when using pre-set TV recording.
This ensures the unit has sufficient power and will not shut down half way during
recording.
16.1 TV out
With the AV cable properly connected to the TV,
Click on the Setup icon on the main menu and then choose Video Setting
Navigate to the Swap display using UP/DOWN Navigation button
Then Press LEFT/RIGHT to activate TV PAL or TV NTSC output. At same time, your
display will be switched over and displayed on the TV screen
Note: only one screen, i.e. either TV or LCD will be active at any time. Please remember to
go back to the settings and re-activate the LCD screen before you disconnect the AV cable
from your TV.