9
DGX-620/YPG-625
■
DISASSEMBLY PROCEDURE
1.
Lower Case Assembly
(Time required: About 9 minutes)
1-1
Remove the twenty (20) screws marked [510A].
The bottom boards L and R can then be removed.
(Fig.2)
1-2
Remove the thirty six (36) screws marked [500] and
the forty six (46) screws marked [510B].
The lower case assembly can then be removed. (Fig.3)
Caution:
1) Flat cable’s contacts are visible from the back.
Pay attention not to insert and install the cable to the connector inversely. (Fig.1)
2) Be sure to attach the removed filament tape just as it was before removal.
[510]: Bind Head Tapping Screw-B 4.0X16 MFZN2W3 (WF154100)
(Fig.2)
[500]: Bind Head Tapping Screw-B 4.0X12 MFZN2W3 (WE981200)
[510]: Bind Head Tapping Screw-B 4.0X16 MFZN2W3 (WF154100)
(Fig.3)
Front Side (Printed Side)
Back side
(Fig.1)
[510A]
[510A]
Bottom Board (L)
Bottom Board (R)
<Bottom View>
<Bottom View>
[500]
[500]
[500]
[500]
[500]
[500]
[500]
[500]
[500]
[500]
[510B]
[510B]
