PCA-1264
WINCH SUPPORT FOR VERTICAL PULLING
12
Document name: PCA-1264 - User Manual
Revision : 04 – 2019/08/30
User Manual
READ CAREFULLY
Installation no. 8 - The winch faces the load. The rope is directly in line with the winch (horizontal).
Accessories used
A PCA-1266
Heck-Pack anchoring system with adaptor for 50 mm towing balls (
vehicle
)
B PCA-1332
Pivoting anchor for vertical pull support
C PCA-1264
Winch support for vertical pulling
WHEN USED IN DIRECT LINE, THE PIVOTING ANCHOR FOR VERTICAL PULL SUPPORT (PCA-1332) MUST BE FIXED TO THE
WINCH SUPPORT FOR VERTICAL PULL (PCA-1264). THIS ANCHOR (SOLD SEPARATELY) WILL ALLOW THE WINCH TO ALIGN WITH THE LOAD.
PUT
THE ROPE ON THE WINCH ENTRY PULLEY.
A
C
IN THIS SITUATION,
DO NOT USE THE
REDIRECT PULLEY
Supplied with the
Winch support for
vertical pulling
.
B
