20
4.2 Hydraulic Fluid and Engine
Maintenance
WARNING: SHUT OFF ENGINE
BEFORE DOING ANY
MAINTENANCE. TO PREVENT
ACCIDENTAL START-UP, TURN
THE IGNITION SWITCH OFF AND
DISCONNECT THE NEGATIVE
CABLE FROM THE BATTERY
TERMINAL.
Engine Lubrication Servicing
Check the engine oil level. The oil level
should be between the “full” and “add”
marks of the dipstick.
When draining oil place a suitable
container under the drain plug and
remove plug. Drain engine completely
and replace plug.
When replacing engine oil filter, place a
suitable container under the filter and
remove filter. Apply a film of clean oil
to the gasket surface of the new filter.
Install new filter element and tighten
one-half turn after initial gasket contact.
NOTE: Dispose of all consumable items
(filters, oils….etc.) in a manner that is
compatible with the environment.
PortaCo, Inc. suggests you take such
items in a sealed container to your local
service station for reclamation.
DO
NOT
throw these items in the trash or
pour them on the ground.
Hydraulic Fluid Servicing
See engine manual for detailed
instructions and service intervals.
Summary of Contents for D-60S09-F7-S
