Attach the operating levers to the
arms using the 4 bolts, washers
and nuts supplied. Ensure the
fixings are tight before use.
The Front Support is temporarily
attached to the chassis in a rotated
position whilst in packaging.
Remove fixings and re-attach the
Front Support in the position shown.
Remove the Quicksplit 7 from the packaging - the unit is heavy so a 2 person lift is
recommended. The unit can be manoeuvred using the wheels by lifting the handle
at opposite end. For transportation a 2 person lift is essential.
Front Support
Operating Handle 1
Operating Handle 2
4
Setting up
