Transport the machine to a designated work place on flat, even ground. For best operation the
Front Support should be fixed to the ground to ensure stability.
The Operating Handle should be in the starting position
1 and the other operating handle in
position
2. Check all moving parts are attached and fixed securely.
Please check your Quik-Split device and contact your supplier immediately if any parts are
incomplete or if you are unsure.
Front Support
Operating Handle 1
Emergency Cut off Switch
Reset Button
Operating Handle 2
Motor
Ram
Splitting Wedge
5
Controls and main features
When placing your log onto the
Quik-Split machine, ensure it is
positioned length-ways and not
horizontally and aligned centrally
with the splitting wedge
