10
5. Fitting the axle and wheels
Tip the unit to access the frame to insert the axle.
Take the axle with the welded washer at the right hand side (looking from the front
of the RufCut) and push through as shown, then twist to insert the other end through
the framework.
6. Fitting wheels - Right hand wheel looking from front.
Use the washer, spacer and circlip on the right hand side, slide on wheel then use a
washer and large locknut to retain wheel. Note: you may need to use a pair of pliers/
mole grips to prevent the axle from turning when tightening the nyloc nut.
Wheels and Axles
