12
Preparing the fuel
Use the mixing container supplied to mix the petrol and 2 stroke oil (see
specifications) in the ratio of 25:1. Fill the fuel tank of the Rufcut (do not overfill).
Starting
To prime the engine with fuel press the flexible plastic bulb several times to pump
the fuel into the carburettor
Move the red lever up to set the choke to enable easier starting especially in cold
weather. Once engine is running move lever into the run position.
On the handle slide the STOP button to the right to allow the machine to run
Operation
STOP RUN
SPEED OF HEAD
INCREASES WHEN THIS IS
PRESSED
ENGAGING THIS BUTTON WHEN
RUNNING WILL LOCK THE
MACHINE AT HALF THROTTLE
DEPRESS THIS LEVER
TO ENABLE SPEED CONTROL
