8
Setting up
Assembly
The RufCut is supplied partly assembled - to get started please follow the instructions
below:
1
. Remove items from the box
and check the contents. The engine is already
mounted in the frame. Place frame and engine in upright position.
2. Assemble the handle
by rotating and inserting into frame; use the bolts and
dome nuts
A
to secure.
3. Install the brushcutter shaft
Remove the allen screws from the clutch housing.
Insert the brushcutter shaft into the clutch housing - you may need to rotate the shaft
to allow the splines to engage. Align the hole in the brushcutter arm with the small
allen screw and tighten.
A
