background image

3 - ENG

A10642

IMPORTANT SAFETY INSTRUCTIONS

Save these instructions

Improper operation or maintenance of this product could result in serious injury and 
property damage. Read and understand all warnings and operation instructions before 
using this equipment.

HAZARD

WARNING: Risk of explosion or fire

How To Prevent It

What Could Happen

It is normal for electrical contacts 

within 

the motor and pressure switch

 to spark.

If 

electrical 

sparks

 from compressor 

come 

into contact with flammable vapors, they 

may ignite, causing fire or explosion.

Restricting

 any of the 

compressor  

ventilation openings

 will cause serious 

overheating and 

could cause fire.

Unattended operation

 of this product 

could result in personal injury or  

property damage. To reduce the risk 

of fire, do not allow the compressor to 

operate unattended.

Always 

operate the compressor in a

 

well ventilated 

area free of combustible 

materials, gasoline, or solvent vapors.

If spraying flammable materials, 

locate 

compressor at least 20 feet away from 

spray area.

 An additional length of hose 

may be required.

Store flammable materials in a secure 

location away from compressor.

Never place objects against or on top of 

compressor. Operate compressor

 in an 

open area 

at least 12 inches away from

 

any

 wall or obstruction

 that would restrict 

the flow of fresh air to  the ventilation 

openings.
Operate compressor in a clean, dry well 

ventilated area.

 Do not operate unit 

indoors or in any confined area.
Always remain in attendance

 with the 

product when it is operating.

Always disconnect electrical power by 

moving pressure switch lever to the off 

position and drain tank daily or after 

each use.

Summary of Contents for C2001





















Reviews: