4 - ENG
D26126
HAZARD
RISK OF BURSTING
AIR TANK:
THE FOLLOWING CONDITIONS COULD LEAD TO A WEAKENING OF
THE TANK, AND RESULT IN A VIOLENT TANK EXPLOSION AND COULD CAUSE
PROPERTY DAMAGE OR SERIOUS INJURY.
HOW TO PREVENT IT
WHAT CAN HAPPEN
DRAIN TANK DAILY OR AFTER EACH USE.
IF
TANK DEVELOPS A LEAK, REPLACE IT
IMMEDIATELY WITH A NEW TANK OR REPLACE
THE ENTIRE COMPRESSOR.
NEVER
DRILL INTO, WELD, OR
MAKE ANY
MODIFICATIONS TO THE TANK
OR ITS
ATTACHMENTS.
THE TANK IS DESIGNED TO WITHSTAND
SPECIFIC OPERATING PRESSURES.
NEVER
MAKE ADJUSTMENTS OR PARTS
SUBSTITUTIONS TO ALTER THE FACTORY
SET OPERATING PRESSURES.
FOR ESSENTIAL CONTROL OF AIR
PRESSURE,
YOU MUST INSTALL A PRESSURE
REGULATOR AND PRESSURE GAUGE TO THE
AIR OUTLET (IF NOT EQUIPPED)
OF YOUR
COMPRESSOR. FOLLOW THE EQUIPMENT
MANUFACTURERS RECOMMENDATION AND
NEVER EXCEED THE MAXIMUM ALLOWABLE
PRESSURE RATING OF ATTACHMENTS.
NEVER USE COMPRESSOR TO INFLATE
SMALL LOW-PRESSURE OBJECTS SUCH AS
CHILDREN’S TOYS, FOOTBALLS,
BASKETBALLS, ETC.
1.
FAILURE TO PROPERLY DRAIN
CONDENSED WATER FROM THE
TANK, CAUSING RUST AND THINNING
OF THE STEEL TANK.
2.
MODIFICATIONS OR ATTEMPTED
REPAIRS TO THE TANK.
3.
UNAUTHORIZED MODIFICATIONS TO
THE UNLOADER VALVE, SAFETY
VALVE, OR ANY OTHER COMPONENTS
WHICH CONTROL TANK PRESSURE.
4.
EXCESSIVE VIBRATION CAN WEAKEN
THE AIR TANK AND CAUSE RUPTURE
OR EXPLOSION.
ATTACHMENTS & ACCESSORIES:
EXCEEDING THE PRESSURE RATING OF AIR
TOOLS,
SPRAY GUNS, AIR OPERATED
ACCESSORIES, TIRES AND OTHER
INFLATABLES
CAN CAUSE THEM TO
EXPLODE
OR FLY APART, AND COULD
RESULT IN SERIOUS INJURY.
HAZARD
RISK FROM FLYING OBJECTS
HOW TO PREVENT IT
WHAT CAN HAPPEN
THE
COMPRESSED AIR
STREAM
CAN
CAUSE SOFT TISSUE DAMAGE
TO EXPOSED
SKIN
AND CAN PROPEL
DIRT, CHIPS,
LOOSE
PARTICLES
AND SMALL OBJECTS
AT HIGH
SPEED,
RESULTING IN PROPERTY DAMAGE
OR PERSONAL INJURY.
ALWAYS
WEAR ANSI Z87.1 APPROVED
SAFETY GLASSES WITH SIDE SHIELDS
WHEN
USING THE COMPRESSOR.
NEVER POINT
ANY
NOZZLE OR SPRAYER
TOWARD
ANY PART OF THE BODY OR AT
OTHER
PEOPLE OR ANIMALS.
ALWAYS
TURN THE COMPRESSOR OFF AND
BLEED PRESSURE
FROM THE AIR HOSE AND
TANK BEFORE ATTEMPTING MAINTENANCE,
ATTACHING TOOLS OR ACCESSORIES.
