background image

7 - ENG

A07300

Review and understand

 all instructions 

and 

warnings

 in this manual.

Be come fa mil iar with the op er a tion and 
con trols

 of the air compressor.

Keep operating area clear

 of all persons, 

pets, and obstacles.

Keep chil dren away

 from the air  

compressor 

at all times

.

Do not operate

 the product 

when fatigued 

or under the influence of  

alcohol or 

drugs.  Stay alert at all times.
Never defeat the safety fea tures

 of this 

prod uct.

Equip area of operation with a fire  
extinguisher.
Do not op er ate machine with missing, 
broken, or un au tho rized parts.

WARNING: Risk of Unsafe Operation

Unsafe op er a tion

 of your air compressor 

could lead to se ri ous in ju ry or death to 
you or others.

HAZARD

WARNING: Risk of Serious Injury or Property Damage 

When Transporting Compressor

Oil can leak or spill

 and could result in 

fire or breathing hazard; serious injury or 
death can result.  oil leaks will damage 
carpet, paint or other surfaces in vehicles 
or trailers.

Always 

place COMPRESSOR on a  

protective mat when transporting

 to  

protect against damage to vehicle from 
leaks. Remove COMPRESSOR from 
vehicle immediately upon arrival at your 
destination.

(Fire, Inhalation, Damage to Vehicle Surfaces)

HAZARD

SAVE THESE INSTRUCTIONS

How To Prevent It

What Could Happen

How To Prevent It

What Could Happen

Summary of Contents for CFBN125A



















Reviews: