background image

6 - ENG

A09770

WARNING: Risk of Burns

Touching exposed metal 

such as the 

compressor head or outlet tubes,

 can 

result in serious burns.

Never touch any exposed metal parts 

on compressor 

during or immediately 

after operation. 

Compressor will remain 

hot 

for several minutes after operation.

Do not 

reach around protective shrouds 

or 

attempt maintenance until unit has 

been allowed to cool.

WARNING: Risk from Moving Parts

Never operate the compressor with 

guards 

or covers which are

 damaged or 

removed.

Moving parts 

such as the pulley, flywheel, 

and belt

 can cause serious injury 

if 

they come into contact with you or your 

clothing.

WARNING: Risk of Falling

A portable 

compressor can fall

 from 

a table, workbench, or roof c

ausing 

damage to the compressor and could 
result in serious injury or death to the 
operator.

Always 

operate compressor in a stable 

secure position

 to prevent accidental 

movement of the unit. 

Never operate 

compressor on a roof or other elevated 
position. Use additional air hose to 
reach high locations.

HAZARD

HAZARD

HAZARD

Any

 repairs 

required on this product 

should be performed by authorized 

service center personnel.

Attempting to operate

 compressor 

with 

damaged or missing parts

 or attempting 

to repair compressor with protective 

shrouds removed can expose you to 

moving parts and 

can result in serious 

injury.

How To Prevent It

What Could Happen

How To Prevent It

What Could Happen

How To Prevent It

What Could Happen

Summary of Contents for CFFC350C























Reviews: