background image

9 — ENG

RISK FROM LIFTING

HAZARD

HOW TO PREVENT IT

WHAT COULD HAPPEN

The generator is too heavy to be lifted
by one person. Obtain assistance
from others before you try to move
it.

Serious injury can result from attempt-
ing to lift too heavy an object.

Lifting a very heavy object.

READ AND UNDERSTAND ALL WARNINGS BEFORE

ATTEMPTING TO OPERATE GENERATOR.

RISK OF MOVING PARTS

HAZARD

HOW TO PREVENT IT

WHAT COULD HAPPEN

Never operate generator with guard-
ing or cover plates removed. Avoid
wearing loose fitting clothing or jew-
elry which could be caught by mov-
ing parts.

The generator contains parts which ro-
tate at high speed during operation.
These parts are covered by guarding to
prevent injury.

Contact with moving parts can result
in serious injury.

HAZARD

HOW TO PREVENT IT

WHAT COULD HAPPEN

During operation, touch only the con-
trol surfaces of the generator. Keep
children away from the generator at
all times. They may not be able to
recognize the hazards of this prod-
uct.

Contact with hot surfaces, such as en-
gines exhaust components, could result
in serious burns.

Contact with hot engine and genera-
tor components.

RISK OF HOT SURFACES

Summary of Contents for CH350CS-CA





















Reviews: