Porter-Cable CL180PS, Instruction Manual

Some dust created by power sanding, sawing, grinding,

drilling, and other construction activities contains chemicals

known (to the State of California) to cause cancer, birth defects or other repro-

ductive harm. Some example of these chemicals are:

●

●

lead from lead-based paints

●

●

crystalline silica from bricks and cement and other masonry products

●

●

arsenic and chromium from chemically-treated lumber

Your risk from these exposures varies, depending on how often you do this

type of work. To reduce your exposure to these chemicals: work in a well

ventilated area, and work with approved safety equipment, always wear

MSHA/NIOSH approved, properly fitting face mask or respirator when using

such tools.

2

SAFETY GUIDELINES - DEFINITIONS

indicates an imminently hazardous situation which, if not 

avoided, will result in death or serious injury.

indicates a potentially hazardous situation which, if not 

avoided,could result in death or serious injury.

indicates a potentially hazardous situation which, if not 

avoided,may result in minor or moderate injury.

used without the safety alert symbol indicates potentially 

hazardous situation which, if not avoided, may result in 

property damage.

This manual contains information that is important for you to know and under-

stand. This information relates to protecting YOUR SAFETY and PREVENTING

EQUIPMENT PROBLEMS. To help you recognize this information, we use the

symbols below. Please read the manual and pay attention to these sections. 

Read and understand all instructions. Failure to fol-

low all instructions listed below, may result in electric shock, fire and/or

serious personal injury.   

SAVE THESE INSTRUCTIONS.

GENERAL SAFETY RULES

WORK AREA

1.

Keep your work area clean and well lit. Cluttered benches and dark

areas invite accidents.
2.

Do not operate power tools in explosive atmospheres, such as in the

presence of flammable liquids, gases, or dust. Power tools create sparks
which may ignite the dust or fumes.
3.

Keep bystanders, children, and visitors away while operating a

power tool. Distractions can cause you to lose control.

ELECTRICAL SAFETY

1.

Do not abuse the cord. Never use the cord to carry the tool. Keep

cord away from heat, oil, sharp edges or moving parts. Replace damaged
cords immediately. Damaged cords increase the risk of electric shock.
2.

A battery operated tool with integral batteries or a separate battery

pack must be recharged only with the specified charger for the battery.
A charger that may be suitable for one type of battery may create a risk of fire
when used with another battery.
3.

Use battery operated tool only with specifically designated battery

pack. Use of any other batteries may create a risk of fire.

PERSONAL SAFETY

1.

Stay alert, watch what you are doing, and use common sense when

operating a power tool. Do not use tool while tired or under the influence
of drugs, alcohol, or medication. A moment of inattention while operating
power tools may result in serious personal injury.