background image

2-ENG

CAUTION

 indicates a potentially

hazardous situation which, if not
avoided, 

may

 result in

  minor or

moderate injury.

This manual contains information that is important for you to know and understand. This infor-
mation relates to protecting 

YOUR

 

SAFETY

 and 

PREVENTING

 

EQUIPMENT PROBLEMS

. To

help you recognize this information, we use the symbols below. Please read the manual and
pay attention to these sections.

DANGER

 indicates an imminently

hazardous situation which, if not
avoided, will result in 

death or

serious injury.

CAUTION 

used without the safety

alert symbol indicates a potentially
hazardous situation which, if not
avoided,

  may  

result in

  property

damage.

WARNING 

indicates a potentially

hazardous situation which, if not
avoided, 

could

 result in 

death or

serious injury

.

Call our

 Toll Free Number 1-888-559-8550, 

to obtain the location of the nearest Autho-

rized Service Center for ordering repair parts and for warranty repairs.

When ordering repair parts from your local Authorized Service Center, always give the
following information:

• Model number of your compressor

• Part number and description of the item you wish to purchase

Retain Original Sales Receipt as Proof of Purchase for Warranty Repair Work.

SAFETY GUIDELINES - DEFINITIONS

IMPORTANT SAFETY INSTRUCTIONS

 When using electric tools, basic safety precautions

should always be followed to reduce the risk of fire, electric shock
and personal injury, including the following:

READ AND FOLLOW ALL INSTRUCTIONS.

This tool was designed for certain applications.  Porter-Cable strongly recommends
that this tool NOT be modified and/or used for any application other than for which
it was designed.  If you have any questions relative to its application, DO NOT use
the tool until you have written Porter-Cable and we have advised you.

Technical Service Manager
Porter-Cable Corporation
4825 Highway 45 North
P.O. Box 2468
Jackson, TN 38302-2468

Summary of Contents for CPLC7060V



























Reviews: