background image

12

2. Tool does nothing or

Inadequate air supply.

Verify adequate air supply.

operates sluggishly.

Inadequate lubrication.

Put 5 or 6 drops of oil into air inlet.

Worn or damaged   

Install Overhaul Kit. 

o-rings or seals.

3. Air leak near bottom

Loose screws.

Tighten screws.

of tool.

Worn or damaged

Install Overhaul Kit.

o-rings or bumper.

4. Tool jams frequently.

Incorrect fasteners.

Verify approved fasteners of 
correct size.                             

Damaged fasteners.

Replace w/undamaged fasteners.         

Magazine or nose

Tighten screws.

screws loose.
Magazine is dirty.

Clean magazine.                             

Driver is worn or damaged.

Install “DRIVER” Maintenance Kit.

5. Other.

Contact a Porter-Cable 
Service Facility.

A complete line of accessories is available from your Porter-Cable • Delta
Supplier, Porter-Cable • Delta Factory Service Centers, and Porter-Cable
Authorized Service Stations. Please visit our Web Site 

www.porter-cable.com

for a catalog or for the name of your nearest supplier.

Since accessories, other than those offered by Porter-

Cable • Delta, have not been tested with this product, use of such
accessories could be hazardous. For safest operation, only Porter-Cable
• Delta recommended accessories should be used with this product.

ACCESSORIES

PORTER-CABLE LIMITED 

ONE YEAR WARRANTY

Porter-Cable warrants its nailing and stapling tools for a period of one year from the date of original
purchase. We will repair or replace at our option, any part or parts of the product and accessories
covered under this warranty which, after examination, proves to be defective in workmanship or
material during the warranty period. For repair or replacement return the complete tool or accessory,
transportation prepaid, to your nearest Porter-Cable Service Center or Authorized Service Station.
Proof of purchase may be required. This warranty does not apply to O-rings and Driver Blades or to
repair or replacement required due to misuse, abuse, normal wear and tear or repairs attempted or
made by other than our Service Centers or Authorized Service Stations.

ANY IMPLIED WARRANTY, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE, WILL LAST ONLY FOR ONE (1) YEAR FROM THE DATE
OF PURCHASE.

To obtain information on warranty performance please write to: PORTER-CABLE CORPORATION,
4825 Highway 45 North, Jackson, Tennessee 38305; Attention: Product Service. THE FOREGOING
OBLIGATION IS PORTER-CABLE’S SOLE LIABILITY UNDER THIS OR ANY IMPLIED WARRANTY
AND UNDER NO CIRCUMSTANCES SHALL PORTER-CABLE BE LIABLE FOR ANY INCIDENTAL
OR CONSEQUENTIAL DAMAGES. Some states do not allow limitations on how long an implied
warranty lasts or the exclusion or limitation of incidental or consequential damages, so the above
limitation or exclusion may not apply to you.

This warranty gives you specific legal rights and you may also have other legal rights which vary
from state to state.

Summary of Contents for FN250A














Reviews: