FAILURE TO START
Should your laser level fail to operate, make sure batteries are charged and
properly installed.
BATTERY
The batteries will discharge if stored for long periods of time, and may require
replacement before use.
SERVICE AND REPAIRS
All quality tools will eventually require servicing or replacement of parts due to
wear from normal use. These operations, should ONLY be performed by
either an AUTHORIZED PORTER-CABLE SERVICE STATION or a
PORTER-CABLE
•
DELTA FACTORY SERVICE CENTER. All repairs made
by these agencies are fully guaranteed against defective material and
workmanship. We cannot guarantee repairs made or attempted by anyone
other than these agencies.
Should you have any questions about your laser level, feel free to write us at
any time. In any communications, please give all information shown on the
nameplate of your laser level (model number, type, serial number, etc.).
ACCESSORIES
A complete line of accessories is available from your Porter-Cable
Supplier, Porter-Cable
•
Delta Factory Service Centers, and Porter-
Cable Authorized Service Stations. Please visit our Web Site
www.porter-cable.com
for a catalog or for the name of your nearest
supplier.
WARNING:
Since accessories other than those offered by
Porter-
Cable
have not been tested with this product use of such
accessories could be hazardous. For safest operation, only
Porter-
Cable
recommended accessories should be used with this product.
GENERAL MAINTENANCE
KEEP TOOL CLEAN
All plastic parts should be cleaned with a soft damp cloth. NEVER use
solvents to clean plastic parts. They could very possibly dissolve or otherwise
damage the material.
7
905067 - 03-21-02.qxd 4/3/02 8:18 AM Page 7
