Flange Machine
Part Number 6Z8303
Safety
7
Figure 2.4
Belt guard
Electrical and Pneumatic Devices
The PFM-4000 Flange Machine uses 220 VAC ±5%, alternating current, single
phase, 15 amps. To ensure your safety during maintenance procedures and when
you are away from the machine, always press the red OFF button located on the
left side of the machine. Only qualified personnel should perform service to the
electrical system.
PSI
Pounds per square
inch; a measure of air
pressure.
Pneumatic power to the flange machine is supplied through a single connection.
The main air regulator is located at the bottom of the pneumatic panel. This panel
is located under the tabletop and is mounted to the legs on the right side of the
table. The proper setting for the main air regulator is 80 psi (5.5 bars). See
for more information.
Bar
A metric unit of
pressure equal to one
million dynes (a unit of
force) per square
centimeter.
In the event that the pneumatic power falls below the recommended psi, the
machine head will operate poorly.
Figure 2.5
Main air regulator
