Lowes.com/portfolio
Lowes.com/portfolio
4
5
Hardware Used
x 2
Cap nut
x 2
x 1
Crossbar
x 2
ASSEMBLY INSTRUCTIONS
1
Machine screw
Mounting screw
1.Take off cap nuts (AA) . Then attach the crossbar
(EE) by tightening the machine screws (CC)
securely into the outlet box (not included).
The mounting screws (DD) should protrude away
from the outlet box.
B
AA
B
CC
B
EE
B
DD
2.
Strip 3/4 in. of insulation from wire ends.
Twist stripped ends together with pliers, black
to black (power) and white to white (neutral).
Attach copper wire to ground wire.
Helpful
hint:
If necessary, attach copper ground wire
to grounded junction box.
2
Hardware Used
x 3
Wire nut
3.
.
3
BB
Attach wire nuts (BB). Tape wire nuts (BB)
and wires together.
EE
DD
AA
CC
BB
ASSEMBLY INSTRUCTIONS
4
4. Install the
flying ring (A) onto the fixture (B).
A
B
5. Place fixture (B) onto mounting screws (DD).
Then secure with cap nuts (AA).
5
DD
AA
Hardware Used
x 2
Cap nut
AA
x 2
Mounting screw
DD
B
6
6. Install light bulb (not included). Use one 60-watt
max. standard-base bulb or one 13-watt standard-
base CFL bulb.
• Note: Before use, add silicone glass sealant between wall and canopy, leaving the bottom clear
so moisture can drip down.
